Raw material testing machine

Brief Introduction:This machine is a testing instrument specially designed for sofa spring frames and spring packs. It can meet the following three testing requirements:
1. Durability test: Repeated pressing tests can be conducted under pre-set pressure conditions. The cycle can be preset and the test will automatically stop when the set number is reached.
2. Detection of the relationship between compression range and pressure: Press down according to the preset stroke and stop when the position is reached. Read the spring force of this stroke on the pressure gauge, and display the stroke value on the screen.
3. Spring compression detection under specific pressure: The pressure plate is pressed down to the set pressure and then stops. The display screen shows the compression stroke length of this pressure value.

Brief Introduction:It is applicable to the reciprocating compression fatigue test of foam polymer materials and the determination of residual deformation rate.

Brief Introduction:The paint film wood impactor is designed and manufactured for the impact resistance of the paint film on the surface of furniture, and is used to evaluate the impact resistance of the paint film on the surface of wooden furniture parts.

Brief Introduction:The scratch tester is mainly used to test the scratch resistance of artificial boards and veneered artificial boards. It is an ideal testing device for artificial board enterprises and quality inspection departments at all levels.

Brief Introduction:After accurately measuring the height of the test spring, place it between the compression plates of the testing machine and compress the specimen to the specified height at a frequency of N times per minute. The reciprocating compression will automatically stop after reaching the predetermined number of times.

Brief Introduction:Sponge foam sag hardness tester is called compression testing machine, foam sponge sag hardness tester, for metal and nonmetal, polymer materials, such as tensile, compression, bending, such as low cycle fatigue test of the project, can according to customer's product requirements according to GB, ISO, ASTM, JIS and EN standards, can automatically calculate the maximum test force, fracture strength, yield strength, tensile strength, compressive strength, bending strength, elastic modulus, elongation, elongation stress, set the parameters such as stress and elongation.

Brief Introduction:This machine simulates a match flame source to evaluate the anti-ignition characteristics of soft furniture.

Brief Introduction:The foam rubber reciprocating compression testing machine is a professional testing device specifically designed to test the dynamic fatigue performance of foam rubber materials (such as polyurethane foam, sponge, EVA, etc.) under repeated compression loads. This equipment accurately assesses key indicators such as the permanent compression set rate, resilience performance and durability of materials by simulating the reciprocating compression conditions of materials in actual use.