Technical parameters
1. Test speed: 1-25 times/min |
2. Rotation Angle: you can choose the working mode of repeated rotation or single-direction rotation |
3. Sensor: 200kg |
4. Mechanical structure, ensure that the eccentricity between the load force of the chair and the pressure bar is 2 inches |
5. Counting range: 0-999999, with memory function of stop and power off |
6. Height of bearing surface (cushion) : 300 ~ 850mm |
7. Diameter of turntable: about 900mm |
8. Power supply (power) : single-phase 220V/50Hz/3A |
9. Air source: air pressure: ≥ 0.5mpa; Flow rate: ≥800L/min; The air source is filtered and dried |
10. Body size: about 1220*1200*1960mm (length * width * height) |
11. Weight: about 390kg |
12. Standard accessory (distribution) : chair anti-turning block |
Conform to the standard
QB/T 2280-2016 |
BIFMA X5.1-2017 |
EN 1335:2000 |
Control system
1. The touch screen is equipped with PLC, with the memory function of power off and on; |
2. With breakpoint protection (alarm) function, deceleration motor + frequency conversion control; |
3. Manual pressure regulation, SMC precision barometer; |
4. Memory function of stop/power off counter. |
5. Select arbitrary or 360-degree rotation mode. |
Next Article:Office chair backrest test machine (backpull type)