Tilt Stability Test Weights-Chair testing machine-Furniture testing machine, bathroom testing machine, environment testing machine, sports equipment t-Lituo testing machine

Product Details

Description

Evaluate the stability of the front and back of the chair.

Applicable Standards

BIFMA X5.1-2017-12.3;EN 1022:2005-4.4

BS EN 1335-3:2009-7.1.7;

Technical Parameter

1. The contact surface is made of plastic synthetic material, which is smooth, hard, non-absorbent and corrosion-resistant.

2. The friction force conforms to BIFMA X5.1-2011 static friction requirement.

3. Other parameters at the same time BIFMA and BS EN sitting after the stability of the load module requirements

4. Size: Diameter: φ350±0.5mm Thickness: 48±0.3mm

5. Weight: 10KG±0.1kg

6. Friction: 71bf±2lbf

7. Quantity: 13 pieces

Last Article：Office Chair Backrest, Armchair Strength Test Machine

Next Article：Office chair casters life testing machine | office chair casters durability testing machine | office chair casters fatigue testing machine

Chair Measuring Device(CMD)

Brief Introduction:This product reliably determines the dimensions and data required by standards for office swivel chairs, and the dimensions can be checked by means of a test stand and various measuring devices. Digital protractors and scales are also available to accurately measure angles and dimensions.

Related Products

Cabinet Door Hinges Comprehensive Testing Machine

Brief Introduction:This machine is suitable for vertical static loads on finished and semi-finished hinges of cabinet doors. Horizontal static load. Operating force. Durability test. Simulate the common usage process and repeatedly open and close the hinge. After a certain number of cycles, check whether the hinge is damaged or has any other conditions that affect its use.

Related Products

Chair stability testing machine

Brief Introduction:This machine is to determine the stability of table and chair furniture under the conditions of external static load, that is, the ability to maintain no tipping under the action of external static load and the mechanical properties of the furniture test, is to simulate the strength or bearing capacity of the furniture under the condition of one-time or repetitive load when the furniture is in normal use and customary misuse. Used to test the strength of the product under the heavy load conditions it may encounter.

Related Products

Office Chair Armrests Fatigue and Alternating Bending Durability Testing Machine

Brief Introduction:This machine is used to test the durability of office chair armrests under cyclic side pressure (at an Angle of 10 degrees from the plumb line). Test armrest durability, front corner static pressure durability. This device is a multi-function test device, which can realize a variety of test functions by adjusting the direction of the output force of the cylinder.

Related Products

Chair testing machine

Chair Measuring Device(CMD)

Office Chair Backrest Cycle Tester (PLC Control Forward Pulling Type)

Office Chair Base Load Static Tester (Computer Control) | Office Chair Five-jaw Static Pressure Testing Machine (Computerized type)

office chair air pressure rods durability testing machine

Cabinet Door Hinges Comprehensive Testing Machine

Office chair size measuring machine

Chair stability testing machine

Office Chair Armrests Fatigue and Alternating Bending Durability Testing Machine